Communication has always been an important aspect of human lives, but now it is even more important. Our mobile phones have revolutionized communication so that we can connect with anyone from anywhere at any time. But, all this is possible only when you have strong mobile reception. There are a lot of places where the signal reception is not proper and mobile users in those areas face challenges with mobile signal reception. To instantly and permanently solve the mobile signal reception issues you need to install a mobile signal booster in your house.
In this post, we will discuss everything about the mobile signal amplifier and how to install it.
Let’s first see and understand what a mobile signal booster is. It is a small electronic device that works on the frequency bands that are used by cellular operators to provide their services. It is an effective way to boost the signal of smartphones or mobile phones in order to have excellent reception in the part covered by this system. This device is also known as a mobile signal repeater or mobile signal amplifier.
In order to accomplish its mission, it is composed of three elements that are connected to each other with coax cables including the external antenna, the internal antenna, and the GSM amplifier. Each of these components has its own role in boosting a mobile signal.
The external antenna is placed outside the building where it can capture the existing weak signals and send that to the amplifier. The amplifier amplifies that signal to make it five bars stronger. After amplifying the amplifier sends the amplified signals to the internal antenna.
The internal antenna is placed inside the building where the amplified signals are required. It broadcasts the amplified signals inside the building. This way the residents inside the building receive and enjoy stronger mobile signal reception.
How to Install a Mobile Signal Booster?
Installing a mobile signal booster is very easy. You can do it yourself without any special tools or technical skills. You can install and start using it in less than 15 minutes. To avoid any problems and set it up correctly follow the steps below:
Position the external antenna on the roof of your building. If you can’t access the roof then install it on your balcony or somewhere it can receive the existing mobile signal. This is the first step. Also, make sure that it is well aligned with the nearest relay tower.
Connect the coax cable with it and at the other end connect it to the amplifier. It is essential to proceed in this precise order: the amplifier first, the antenna second. It is also necessary to connect the power cable with it. You should avoid winding the cable if you want better reception.
This last step is the connection of the internal antenna and the amplifier. This is done either by coaxial cable or by direct connection. It depends on the model you chose when purchasing the “Amplifier”. This antenna has the functionality of broadcasting the signal extended by the amplifier. If you want the installation to go perfectly, put the two antennas at least three meters apart.
It has many advantages since it can actually be the best alternative for those who live in a place with the very poor mobile network coverage. It prevents your smartphone to emit radiation which mobile phones do while searching for strong signal reception.
In terms of distance, it can provide enough power to connect to a base station located miles away.
It helps save your phone’s battery and gives it a longer life. Because in case of weak signals the phone keeps searching for the strongest signals to connect to and drains the battery of the phone.
It is quite achievable to know precisely the potential of your mobile signal through your network lines. There are two ways to achieve this, but each depends on the phone model you have at your disposal.
— If you have an Android, just enter your smartphone’s “settings”, in the “About phone” section. When you’re in, go to the “Status” category to see the signal strength. Its unit is in dBm which is “the power ratio in decibels between the measured power and one milliwatt”.
— As for the phone with an iOS, the procedure is totally different. You must dial “*3001 # 12345#” to access the “field test mode”. As soon as you enter, you press the network bars that are normally displayed. Moreover, they will be modified by their numerical value and you must press the “on/off” button to save this link. When the screen indicates the “power off” option, press the “Home” button to return to the home screen.
The negative affirms that the signal is excellent. For example, if it is within -40 dBm, the connection is very good. But, if it is close to -120 dBm, it is very bad. Therefore, you must check this indication at all times in order to know the true potential of your mobile signal booster.
Now you understood how ta install a mobile signal booster and how it can help you communicate better. So, you have no reason to keep struggling with the poor signal reception issues. Buy your mobile signal booster today and enjoy better signal reception.
©Copyright 2024 SignalBoosters. All Right Reserved
