LIMITED TIME: 10% OFF ALL BOOSTERS.Ends Soon!

Voice Only

Offices, Studios, And Homes
R 31020
R 25723.5

Indoor coverage 5000 SQM

Frequency 900 MHz




If you have a weak signal of 2-3 bars outside. Please add the yaggi antenna below in booster upgrades to guarantee signal increase and the best performance from the booster.

Free delivery right at your doorsteps
30 Days money back guarantee
5 Bar signal
guarantee
Work on Network & Carrier
Free delivery right at your doorsteps
30 Days money back guarantee
5 Bar signal guarantee
Work on Network & Carrier
All the four cellular service providers i.e., Telkom, Vodacom, Cell C, and MTN in South Africa use 900 MHz, frequency bands. All of them claim to provide the best cellular service and cover the entire population of South Africa. But, there are a lot of areas in the country where your mobile signals are very weak. Weak signals cause frequent call drops, disturbing voices while on calls, or even no networks. The reasons for the weak signals are many but the solution is only one, i.e., to use a 2G signal booster. The 2G Signal Booster – 5000 SQM works on the 900 MHz frequency band. It is a single-band signal booster and boosts 2G signals for all the cellular networks in South Africa.
It is the best and most advanced solution to amplify your weak signal in areas up to 5000 square meters. This mobile signal booster is ideal for large properties like homes, offices, shops, factories, hospitals, restaurants, airports, hostels, etc. It comes with a complete kit that has everything you need to boost your signal strength. It can support 250-300 users simultaneously.
This booster perfectly boosts the (2G) GSM voice signal for MTN, Vodacom, Cell C, and Telkom in South Africa. Please note that this booster doesn’t boost 3G or 4G signals for any network. But, this booster guarantees you uninterrupted and drop-free calls on Spark cellular networks because of a full-strength signal boosting.
With the external aerial antenna, the phone signal booster takes the existing weak signal from the nearest cellular signal relay tower. Then, it sends that signal to the amplifier and the amplifier amplifies it and sends it to the internal antenna. Then, the internal antenna pushes out a full-strength signal inside. It ensures that you get a full-strength signal in the entire coverage area.
The installation process of the mobile signal boosters is very easy and simple. Usually, it just takes less than 15 minutes to set it up. Follow step by step the instructions guide.
Please read properly the instructions before the purchase as you may need to purchase additional items for the installation. If you have a weak 1-3 bar signal, you need to upgrade to a YAGI antenna. The booster kit comes with a standard panel antenna. The Yagi antenna guarantees the booster unit to work to its full potential. You can buy a Yagi antenna from the accessories section of our website.
This booster comes with 4 internal Omni antennas, but if required you can add up to 8 Omni antennas to this booster to increase your coverage.
Among the major features of the 2G Signal Booster are:
Every mobile signal booster listed on our website is confirmed to be 100% safe for its users, mobile devices, health, and the environment. These signal boosters are CE and RoHS certified which proves their safety and international acceptance.
If you are uncertain about what Mobile phone signal booster you need, do not hesitate in contacting us. We will help you choose the best signal booster for your need.
| Frequency | Bands |
|---|---|
| 800MHz | Band 20 |
| 850MHz | Band 5 |
| 900MHz | Band 9 |
| 1800MHz | Band 3 |
| 2100MHz | Band 1 |
| 2300MHz | Band 40 |
| 2600MHz | Band 7 |
| 3400MHz | Band 42 |
| Specification | Uplink | Downlink |
| Max Gain | 76dB | 83dB |
| Bandwidth | 25 MHz | |
| Ripple in Band | ?8dB | |
| Max. Input Power Without Damage | 0 dBm | |
| Output Power | 23 dBm | 27 dBm |
| Noise Figure @ max. gain | 4.5db | 8db |
| Return loss | ?-8 dB | |
| Time Delay | ?0.5 ?s | |
| MTBF | > 20000 hours | |
| Power Supply | AC:90~265V, 50/ 60Hz;DC:5V 2A | |
| Power Consumption | 4W | |
| Impedance | 50 ? | |
| RF Connector | N -Female | |
| Cooling | Heat sink Convection cooling | |
| Dimensions (L x W x H ) | 198*138*30 mm | |
| Weight | 1.0KG | |
| Installation Type | Wall Installation | |
| Environment Conditions | IP40 | |
| Humidity | <90% | |
| Operating Temperature | -10°C ~ 55°C |
All the four cellular service providers i.e., Telkom, Vodacom, Cell C, and MTN in South Africa use 900 MHz, frequency bands. All of them claim to provide the best cellular service and cover the entire population of South Africa. But, there are a lot of areas in the country where your mobile signals are very weak. Weak signals cause frequent call drops, disturbing voices while on calls, or even no networks. The reasons for the weak signals are many but the solution is only one, i.e., to use a 2G signal booster. The 2G Signal Booster – 5000 SQM works on the 900 MHz frequency band. It is a single-band signal booster and boosts 2G signals for all the cellular networks in South Africa.
It is the best and most advanced solution to amplify your weak signal in areas up to 5000 square meters. This mobile signal booster is ideal for large properties like homes, offices, shops, factories, hospitals, restaurants, airports, hostels, etc. It comes with a complete kit that has everything you need to boost your signal strength. It can support 250-300 users simultaneously.
This booster perfectly boosts the (2G) GSM voice signal for MTN, Vodacom, Cell C, and Telkom in South Africa. Please note that this booster doesn’t boost 3G or 4G signals for any network. But, this booster guarantees you uninterrupted and drop-free calls on Spark cellular networks because of a full-strength signal boosting.
With the external aerial antenna, the phone signal booster takes the existing weak signal from the nearest cellular signal relay tower. Then, it sends that signal to the amplifier and the amplifier amplifies it and sends it to the internal antenna. Then, the internal antenna pushes out a full-strength signal inside. It ensures that you get a full-strength signal in the entire coverage area.
The installation process of the mobile signal boosters is very easy and simple. Usually, it just takes less than 15 minutes to set it up. Follow step by step the instructions guide.
Please read properly the instructions before the purchase as you may need to purchase additional items for the installation. If you have a weak 1-3 bar signal, you need to upgrade to a YAGI antenna. The booster kit comes with a standard panel antenna. The Yagi antenna guarantees the booster unit to work to its full potential. You can buy a Yagi antenna from the accessories section of our website.
This booster comes with 4 internal Omni antennas, but if required you can add up to 8 Omni antennas to this booster to increase your coverage.
Among the major features of the 2G Signal Booster are:
Every mobile signal booster listed on our website is confirmed to be 100% safe for its users, mobile devices, health, and the environment. These signal boosters are CE and RoHS certified which proves their safety and international acceptance.
If you are uncertain about what Mobile phone signal booster you need, do not hesitate in contacting us. We will help you choose the best signal booster for your need.
| Frequency | Bands |
|---|---|
| 800MHz | Band 20 |
| 850MHz | Band 5 |
| 900MHz | Band 9 |
| 1800MHz | Band 3 |
| 2100MHz | Band 1 |
| 2300MHz | Band 40 |
| 2600MHz | Band 7 |
| 3400MHz | Band 42 |

WRITE A REVIEW